Decks · completes · wheels · trucks
Built at the shop. Tested at the park.
Pressed decks, complete boards and the parts to tune them. Watch every board roll in a real session, then build yours.
Sample store. Example prices.
Session clip
Deck rail
Fresh off the wall
-
Drop-through longboard
Original price was: $159.00.$139.00Current price is: $139.00. -
Mini cruiser
$89.00 -
High trucks (pair)
$58.00 -
Standard trucks (pair)
$54.00 -
Classic park wheels
$38.00
Board builder
Deck, wheels, trucks: match them up
A board rides well when the three parts fit each other. Pick a deck width, and the table shows the wheel size and truck axle that suit it.
01
Pick a deck width
02
Pick the wheels
03
Pick the trucks
| Deck width | Wheel size | Truck axle | Good for |
|---|---|---|---|
| 7.75″ – 8.0″ | 50 – 53 mm | 7.6″ – 8.0″ | Street, flip tricks |
| 8.0″ – 8.25″ | 52 – 54 mm | 8.0″ – 8.25″ | Street and park |
| 8.25″ – 8.5″ | 53 – 56 mm | 8.25″ – 8.5″ | Park, transition |
| 8.5″ – 9.0″ | 54 – 58 mm | 8.5″ – 9.0″ | Bowls, cruising |
| Cruiser 8.75″+ | 58 – 65 mm soft | Mid or high | Rolling around town |
Protective gear
Protective gear note: placeholder. Add your own guidance on helmets and pads here.
Park session
Every board gets a session
Before a deck goes on the wall, someone from the shop rides it at the park down the road. If it does not pop, it does not go on sale.
Ridden before it is sold
Set up by hand
Free setup with a complete (sample offer)
Sample description of the shop.
Deck size guide
Which width is yours?
Width matters more than length. Narrow decks flip faster; wide decks feel steady on ramps and in bowls.
7.75"
Narrow
Shoe size
US 6 – 8 (sample)
Feels
Light, quick to flip
Rides
Street
8.0"
Standard
Shoe size
US 8 – 10 (sample)
Feels
All-round
Rides
Street and park
8.25"
Wide
Shoe size
US 9 – 11 (sample)
Feels
Steady on landings
Rides
Park, ramps
8.5"
Extra wide
Shoe size
US 10+ (sample)
Feels
Planted, roomy
Rides
Bowls, transition
Sample measurements. Shoe size is a starting point: stand on a deck in the shop if you can.
Shop by part
Decks, completes and the bits in between
How decks are pressed
Seven plies, one press, a lot of sanding
Thin sheets of maple veneer are glued, stacked and pressed into shape. Then the deck is cut, drilled, sanded and sealed. The clip shows the sanding.
Inside a deck (sample)
From veneer to deck
01 Stack
Seven sheets of veneer
02 Glue
Thin glue between each ply
03 Press
Shaped in a concave mould
04 Cut
Outline and truck holes
05 Sand
Edges rounded, faces smoothed
Sample process description. Times and materials vary by maker.
Team riders (sample)
Three riders, three setups
Street
Rider A
Deck
8.0″ street deck
Wheels
52 mm hard
Trucks
Low
Park
Rider B
Deck
8.25″ park deck
Wheels
54 mm hard
Trucks
Mid
Cruise
Rider C
Board
Drop-through longboard
Wheels
65 mm soft
Trucks
Reverse kingpin
Sample riders and setups for the demo store. Photos show boards and feet, not faces.
Offers
Boards and parts on offer
-
Drop-through longboard
Original price was: $159.00.$139.00Current price is: $139.00. -
Soft cruiser wheels
Original price was: $42.00.$36.00Current price is: $36.00. -
First board complete
Price range: $84.15 through $99.00 -
Blank deck two-pack
Original price was: $96.00.$84.00Current price is: $84.00. -
Park deck, deep concave
Price range: $57.80 through $68.00
Sample reviews
Heard at the park
Sample reviews shown for the demo store.
★★★★★
The 8.25 park deck has a nice deep concave. The shop set it up and I was riding the same afternoon.
Sample customer
Park deck, 8.25"
★★★★★
Swapped to the soft wheels on my cruiser. Much quieter on the cracked path to work.
Sample customer
Soft cruiser wheels
★★★★★
Used the size table, picked mid trucks and 54s. Everything fitted first time.
Sample customer
Street complete
Questions
Before you roll
Not sure about a width or a wheel? Email [email protected] or call (555) 014-8821.
Which deck width should I choose?
Most riders start between 8.0″ and 8.25″. Go narrower for street and flip tricks, wider for ramps and bowls. The deck size guide and the board builder table show the details.
Deck or complete board?
A complete comes set up with trucks, wheels, bearings and grip tape: ready to ride. A deck on its own is for riders who want to pick every part.
Hard or soft wheels?
Hard wheels slide and grip well on smooth skateparks. Soft wheels roll over cracks and rough roads, so they suit cruisers.
Do you set up boards?
Yes. Completes leave the shop set up, and we fit grip tape on any deck for free (sample offer).
Do I need protective gear?
Protective gear note: placeholder. Add your own guidance on helmets and pads here.